Great Product Sep 28, 2016

I have extensive building trade skills so installing the AC unit was quite simple for me to tackle myself. I had to have a branch 220v electrical panel added to service the unit. The only problem I had was finding a HVAC contractor to test the unit for leaks prior to firing it up. Since most licensed HVAC contractors don't want to touch so small a job or they don't want the liability of signing off on the leak test if they did not install the unit themselves. I can understand that, but... more

Goodman Gsx13 - 4 Ton - Air Conditioner Feb 16, 2016

Very quiet, you can only hear the fan running. Suction line service valve is too close to the case makes it difficult to braze the suction line in.

Easy As Pie Oct 03, 2016

I elected to install the unit myself. I have decent construction skills and did a lot of reading before hand. The unit came complete and had good directions. I had power to my pool pump near where I planned to install the condenser and did have to go one size larger on the wire to support both units but that was not a problem. The wall unit was easy to install and I used a hammer drill to cut out the 3" hole through my masonry wall. Trim kit worked nicely sealing the hole. I did... more

A Great Little Fan Aug 05, 2016

I bought this in-line fan to pump warm air into a chase containing hot and cold water pipes. When outdoor temperatures drop below 15 degrees Fahrenheit, the air in the chase falls below freezing, so I was worried that the pipes would freeze. This little fan together with flex duct (I stripped away the outer insulation) solved the problem. I have a thermostat in the chase and a control system that turns on the fan when the chase temperature drops below 40 degrees F. Now I can spend time... more

Love Is Fantech Sep 28, 2016

I used this inline fan to hook up to my vent hood in my kitchen. Even though this product was assembled in America, the motor was made in Germany and you certainly can't go wrong with German technology. I also brought LD10 silencer to attach directly to the fan and placed the silencer between the vent hood and the fan. I also purchased the FC10 clamp to hold the silencer and fan in place. I find the clamp itself was not good enough to hold fan and the silencer. To give me a piece of mind,... more