A Great Little Fan Sep 01, 2016

I bought this in-line fan to pump warm air into a chase containing hot and cold water pipes. When outdoor temperatures drop below 15 degrees Fahrenheit, the air in the chase falls below freezing, so I was worried that the pipes would freeze. This little fan together with flex duct (I stripped away the outer insulation) solved the problem. I have a thermostat in the chase and a control system that turns on the fan when the chase temperature drops below 40 degrees F. Now I can spend time... more

Fantech Vhr - 56 Cfm - Heat Recovery Ventilator (hrv) - Top Ports - 4" Duct - Exhaust Review Sep 22, 2016

Great for high humidity pet room ventilation. I bought this unit to improve the air quality in my pet room that contains a 600 gallon aquarium and 200 more gallons in the sump bringing the total volume up to 800 gallons. Needless to say humidity was a problem in this 14' x 14' room. My room has a split ducted a/c unit set to 84 degrees and did have a dehumidifier. These would work together to control the temp and humidity in the room but was using a lot of power to do so. Problem was much... more

Great Heater I'd Buy Again😎 Jul 12, 2016

I replaced my old Modine heater, with a new Modine heater and it works great. The old one, the only thing that went wrong with it, was one of the fan blades broke in half . The old one , didn't owe me nothing, I had it in my shop for 38 years.

Love It! Oct 24, 2016

We talked about this for years and finally had one installed in our master bedroom. Our bedroom is the farthest room from our main unit. We had to keep the thermostat lower than necessary to make our room tolerable to sleep at night. This unit is quiet and cools wonderfully. Doesn't take long to cool the room when turned on. So many options can be programmed with the remote control. LOVE LOVE LOVE!

Owner, Custom Made Aug 12, 2016

I replaced a Dunkirk XEB-3 (20 yrs. old) with the Dunkirk boiler above. The new one is all most identical to the old one, that is the pipes were located same as the old, so gas and water lines were easily plumbed. The old electrical wires could be used although lengthened to connect to the digital controls. The circulators location has changed, it's still provided with its wiring provided. Venting is the same as the old one. I was happy to get another Dunkirk that installed easily.